Chinese Rat D.C. Jack Mod?

[soupbone]

I routed my Chinese made Proco Rat Pedal,so that i can use a standard d.c. jack like this one;http://www.getlofi.com/wp-content/uploads/2011/12/wpid-IMAG0391-1-1.jpg  Does anybody have a picture of how this is supposed to be wired because of the polarity?After installed,Can you use a  regular 9v power supply?(i.e. visual sound 1 spot,voodoo labs pedal power)?,or does it have to run on a.c. power?Thanks in advance

[soupbone]

Uhh...Yello?

[GGBB]

It would be hooked up the same as any stompbox and it's DC so you can use any typical Boss type 9V power supply.

http://www.beavisaudio.com/techpages/StompboxWiring/

[zombiwoof]

It's too late for you, of course, but I just keep 4 or 5 of these adapter cables around for my older Rat, DOD, MXR, etc. pedals that require 1/8" positive tip power supplies, instead of going through the hassle of modding the pedal (especially a vintage pedal where you want to keep it in stock condition):

http://www.ebay.com/itm/C35-1SPOT-ELECTRO-HARMONIX-IBANEZ-BOSS-MXR-DOD-KEELEY-/130539368627?pt=Guitar_Accessories&hash=item1e64c0b0b3

Al

[soupbone]

It would be hooked up the same as any stompbox and it's DC so you can use any typical Boss type 9V power supply.

http://www.beavisaudio.com/techpages/StompboxWiring/

Cool!Sorry,Haven't been on Diy for a little bit because my father passed away.Thanks!

[soupbone]

It's too late for you, of course, but I just keep 4 or 5 of these adapter cables around for my older Rat, DOD, MXR, etc. pedals that require 1/8" positive tip power supplies, instead of going through the hassle of modding the pedal (especially a vintage pedal where you want to keep it in stock condition):

http://www.ebay.com/itm/C35-1SPOT-ELECTRO-HARMONIX-IBANEZ-BOSS-MXR-DOD-KEELEY-/130539368627?pt=Guitar_Accessories&hash=item1e64c0b0b3

Al

Thanks Al!