Using an Airturn Pedal


Using an Airturn Pedal

You can use a Bluetooth Pedal to turn pages wirelessly with unrealBook.

Setup unrealBook for the Airturn Bluetooth Pedal

 

Choose Settings->Network

 

Choose AirTurn Setup, then turn AirTurn Support ON. If you are using a BT-105/106 or Keyboard Based Pedal, make sure it is paired in the iPad Settings app first. Then based on whether you have a BT-105/106, Coda Technologies STOMP, iRig BlueTurn, PageFlip, follow these instructions.

If you have a PED, PED Pro, BT-200, these are AirDirect pedals. Follow these instructions. Note the port assignment order!

Footswitch is 1,3,2,4 in sequence on the pedalboard in Settings->Network->Airturn Switch Assignments. Use AirDirect mode 1.

SET YOUR AIRTURN TO AIR DIRECT MODE 1

Note: This MODE is for AirDirect specific apps only. AirDirect
MODE was created to prevent conflicts with the virtual
keyboard.

  1. Power on the AirTurn
  2. Be sure the AirTurn is in MODE 1 (Hold down the MODE
    button for 1 blink of the red light)

Translate ยป