iOS14/iPadOS14

In general, little has changed with iOS14 if at all. From my testing, an app works completely or not at all (quits). 

There is a bug with renaming files from All Files. Please use do->manage files until this is fixed.

Version 4.24 addresses the problems below. Update when you can from the App Store..

However, if you have a bluetooth pedal, it has been reported that after updating, the virtual keyboard may not come up and you cannot type into certain text fields. To fix this reset the unrealBook preferences.

I have confirmed that iOS14 has a problem with Airturn for at least the iPad Pro 3rd generation. It does not have a problem as far as I know with the first generation. It will prevent certain text fields from being able to be typed in. The only work around is to turn Airturn off while editing, then turn it back on when you want to use the Airturn.Alternately, try this. Go to Settings->Network->Airturn Setup and turn Airturn Support off then on. See if that fixes the problem.

I have not personally seen this, but it has been reported.

Bluetooth Auto Connect still works which is kind of amazing.

Wifi Sharing Master/Slave works. So does ask for files if not found.

As far as Bluetooth pedals the following have been tested

  • Digit (BT-105 series). The usual trick with the onscreen keyboard still works. Here is Airturn’s work around.
  • Coda Music Stomp works perfectly as a BT-105. Just need to pair in the Bluetooth settings of the iPad.
  • iRig Blueturn works as a BT-105. 
  • Airturn Digit (BT-105 series). The usual trick with the onscreen keyboard still works. Here is Airturn’s work around.
  • Airturn PED works. However this was the hardest to get working. In the end I had to install the Airturn app from the App Store, update my PED, then it worked as a BT-105 perfectly. Then I selected AirDirect mode in Network->Airturn Setup. Then I had to press the mode button on the PED once to set it to mode 1. Finally I had to select the PED in Devices and then the info button showed up indicating it was paired. 
  • Airturn BT-200 works. Footswitch is 1,3,2,4 in sequence on the pedalboard in Settings->Network->Airturn Switch Assignments. Use AirDirect mode 1.
  • Coda Music Stomp works perfectly as a BT-105. Just need to pair in the Bluetooth settings of the iPad.
  • iRig Blueturn works as a BT-105. 
  • iRig Blueboard Still works perfectly. Pair with Blueboard App. Use the standard Blueboard proprietary mode.